MeyCan V7

Meycad.kicad_prl

@@ -1,16 +1,16 @@
 {
   "board": {
-    "active_layer": 37,
-    "active_layer_preset": "Front Assembly View",
-    "auto_track_width": true,
+    "active_layer": 36,
+    "active_layer_preset": "",
+    "auto_track_width": false,
     "hidden_nets": [],
-    "high_contrast_mode": 1,
+    "high_contrast_mode": 0,
     "net_color_mode": 1,
     "opacity": {
       "pads": 1.0,
       "tracks": 1.0,
       "vias": 1.0,
-      "zones": 0.6
+      "zones": 1.0
     },
     "ratsnest_display_mode": 0,
     "selection_filter": {
@@ -18,7 +18,7 @@
       "footprints": true,
       "graphics": true,
       "keepouts": true,
-      "lockedItems": true,
+      "lockedItems": false,
       "otherItems": true,
       "pads": true,
       "text": true,
@@ -62,7 +62,7 @@
       35,
       36
     ],
-    "visible_layers": "00290a0_00000000",
+    "visible_layers": "0001030_ffffffff",
     "zone_display_mode": 0
   },
   "meta": {

Software/Switch/Switch.ino

@@ -24,43 +24,44 @@ void setup() {
   SPI.begin();
 
 
-  AddToggleInverse(UP_WOHNZIMMER_TUER, 5, SW_WOHNZIMMER, 4); // Lichtschalter Wohnzimmer Licht 1
-  AddToggleInverse(UP_WOHNZIMMER_TUER, 5, SW_WOHNZIMMER, 3); // Lichtschalter Wohnzimmer Licht 2
-  AddToggle(UP_WOHNZIMMER_TERASSE, 1, SW_WOHNZIMMER, 4); // Licht 1 von Terassenschalter
-  AddToggle(UP_WOHNZIMMER_TERASSE, 1, SW_WOHNZIMMER, 3); // Licht 2 von Terassenschalter
-  
-  AddToggle(0x0769, 1, SW_WOHNZIMMER, 7); // Eingangstür Flur Licht 2
-  AddToggle(0x0769, 1, SW_FLUR, 1); //Eingangstür Flur Licht 1
-  
-  AddToggle(UP_WOHNZIMMER_TUER, 3, SW_WOHNZIMMER, 1); // Licht 1 Wochzimmer Eingangstür
-  AddToggle(UP_WOHNZIMMER_TUER, 4, SW_WOHNZIMMER, 2); // Licht 2 Wochzimmer Eingangstür
-  
-  AddToggle(0x1177, 1, SW_WOHNZIMMER, 6); // Licht Papa Büro
-  AddToggle(0x05A1, 1, SW_WOHNZIMMER, 7); // Flurlicht von Papas Büro
-  AddToggle(0x05A1, 1, SW_FLUR, 1); // Flurlicht von Papas Büro
-  AddToggle(0x01EF, 1, SW_WOHNZIMMER, 7); // Flurlicht von Papas Büro
-  AddToggle(0x01EF, 1, SW_FLUR, 1); // Flurlicht von Papas Büro
-  AddToggle(0x0196, 3, SW_WOHNZIMMER, 7); // Flurlicht von Papas Büro
-  AddToggle(0x0196, 3, SW_FLUR, 1); // Flurlicht von Papas Büro
-  AddToggle(0x0632, 1, SW_FLUR, 5); // Flurlicht von Papas Büro
-  
-  AddToggle(UP_WOHNZIMMER_TUER, 2, SW_FLUR, 2); // Linus Zimmer hoch aus Wohnzimmer
-  AddToggle(UP_WOHNZIMMER_TUER, 1, SW_FLUR, 3); // Linus Zimmer runter hoch aus Wohnzimmer
-  
-  AddToggle(0x0769, 2, SW_FLUR, 4); // Linus Zimmer runter hoch aus Wohnzimmer
-
-
-  AddToggle(UP_KUECHE_FLUR, 1, SW_ANBAU, 2);
-  AddToggle(UP_KUECHE_FLUR, 2, SW_ANBAU, 3);
-  AddToggle(UP_KUECHE_BAD, 1, SW_ANBAU, 2);
-  AddToggle(UP_KUECHE_BAD, 3, SW_ANBAU, 1);
-  AddToggle(UP_KUECHE_BAD, 2, SW_ANBAU, 4);
+//  AddToggleInverse(UP_WOHNZIMMER_TUER, 5, SW_WOHNZIMMER, 4); // Lichtschalter Wohnzimmer Licht 1
+//  AddToggleInverse(UP_WOHNZIMMER_TUER, 5, SW_WOHNZIMMER, 3); // Lichtschalter Wohnzimmer Licht 2
+//  AddToggle(UP_WOHNZIMMER_TERASSE, 1, SW_WOHNZIMMER, 4); // Licht 1 von Terassenschalter
+//  AddToggle(UP_WOHNZIMMER_TERASSE, 1, SW_WOHNZIMMER, 3); // Licht 2 von Terassenschalter
+//  
+//  AddToggle(0x0769, 1, SW_WOHNZIMMER, 7); // Eingangstür Flur Licht 2
+//  AddToggle(0x0769, 1, SW_FLUR, 1); //Eingangstür Flur Licht 1
+//  
+//  AddToggle(UP_WOHNZIMMER_TUER, 3, SW_WOHNZIMMER, 1); // Licht 1 Wochzimmer Eingangstür
+//  AddToggle(UP_WOHNZIMMER_TUER, 4, SW_WOHNZIMMER, 2); // Licht 2 Wochzimmer Eingangstür
+//  
+//  AddToggle(0x1177, 1, SW_WOHNZIMMER, 6); // Licht Papa Büro
+//  AddToggle(0x05A1, 1, SW_WOHNZIMMER, 7); // Flurlicht von Papas Büro
+//  AddToggle(0x05A1, 1, SW_FLUR, 1); // Flurlicht von Papas Büro
+//  AddToggle(0x01EF, 1, SW_WOHNZIMMER, 7); // Flurlicht von Papas Büro
+//  AddToggle(0x01EF, 1, SW_FLUR, 1); // Flurlicht von Papas Büro
+//  AddToggle(0x0196, 3, SW_WOHNZIMMER, 7); // Flurlicht von Papas Büro
+//  AddToggle(0x0196, 3, SW_FLUR, 1); // Flurlicht von Papas Büro
+//  AddToggle(0x0632, 1, SW_FLUR, 5); // Flurlicht von Papas Büro
+//  
+//  AddToggle(UP_WOHNZIMMER_TUER, 2, SW_FLUR, 2); // Linus Zimmer hoch aus Wohnzimmer
+//  AddToggle(UP_WOHNZIMMER_TUER, 1, SW_FLUR, 3); // Linus Zimmer runter hoch aus Wohnzimmer
+//  
+//  AddToggle(0x0769, 2, SW_FLUR, 4); // Linus Zimmer runter hoch aus Wohnzimmer
+//
+//
+//  AddToggle(UP_KUECHE_FLUR, 1, SW_ANBAU, 2);
+//  AddToggle(UP_KUECHE_FLUR, 2, SW_ANBAU, 3);
+//  AddToggle(UP_KUECHE_BAD, 1, SW_ANBAU, 2);
+//  AddToggle(UP_KUECHE_BAD, 3, SW_ANBAU, 1);
+//  AddToggle(UP_KUECHE_BAD, 2, SW_ANBAU, 4);
 
 
   _PROTECTED_WRITE(CLKCTRL.MCLKCTRLA,  CLKCTRL.MCLKCTRLA | 1 << 7);
 
   delay(10); // a bit delay for mcp2515 to get the clock
 
+
   SetMeyPin(0, 1, PIN_PC7);
   SetMeyPin(1, 2, PIN_PC6);
   SetMeyPin(2, 3, PIN_PC5);

Software/UPSoftware/UPSoftware.ino

@@ -4,19 +4,20 @@
 
 
 void setup() {
+  return;
   SPI.begin();
 
   _PROTECTED_WRITE(CLKCTRL.MCLKCTRLA,  CLKCTRL.MCLKCTRLA | 1 << 7);
   delay(10); // a bit delay for mcp2515 to get the clock
 
-  SetMeyPin(0, 1, PIN_PC7);
-  SetMeyPin(1, 2, PIN_PD0);
-  SetMeyPin(2, 3, PIN_PD1);
-  SetMeyPin(3, 4, PIN_PD2);
-  SetMeyPin(4, 5, PIN_PD6);
-  SetMeyPin(5, 6, PIN_PD5);
-  SetMeyPin(6, 7, PIN_PD4);
-  SetMeyPin(7, 8, PIN_PD3);
+  SetMeyPin(0, 1, PIN_PD0);
+  SetMeyPin(1, 2, PIN_PC7);
+  SetMeyPin(2, 3, PIN_PD2);
+  SetMeyPin(3, 4, PIN_PD1);
+  SetMeyPin(4, 5, PIN_PD5);
+  SetMeyPin(5, 6, PIN_PD3);
+  SetMeyPin(6, 7, PIN_PD7);
+  SetMeyPin(7, 8, PIN_PD6);
 
   delay(20);
 

Switch1/#auto_saved_files#

@@ -0,0 +1 @@
+C:\source\Meycan\Switch1\_autosave-Switch1.kicad_sch

unbenannt.kicad_prl

@@ -0,0 +1,75 @@
+{
+  "board": {
+    "active_layer": 0,
+    "active_layer_preset": "All Copper Layers",
+    "auto_track_width": false,
+    "hidden_nets": [],
+    "high_contrast_mode": 0,
+    "net_color_mode": 1,
+    "opacity": {
+      "pads": 1.0,
+      "tracks": 1.0,
+      "vias": 1.0,
+      "zones": 1.0
+    },
+    "ratsnest_display_mode": 0,
+    "selection_filter": {
+      "dimensions": true,
+      "footprints": true,
+      "graphics": true,
+      "keepouts": true,
+      "lockedItems": false,
+      "otherItems": true,
+      "pads": true,
+      "text": true,
+      "tracks": true,
+      "vias": true,
+      "zones": true
+    },
+    "visible_items": [
+      0,
+      1,
+      2,
+      3,
+      4,
+      5,
+      8,
+      9,
+      10,
+      11,
+      12,
+      13,
+      14,
+      15,
+      16,
+      17,
+      18,
+      19,
+      20,
+      21,
+      22,
+      23,
+      24,
+      25,
+      26,
+      27,
+      28,
+      29,
+      30,
+      32,
+      33,
+      34,
+      35,
+      36
+    ],
+    "visible_layers": "fffffff_ffffffff",
+    "zone_display_mode": 0
+  },
+  "meta": {
+    "filename": "unbenannt.kicad_prl",
+    "version": 3
+  },
+  "project": {
+    "files": []
+  }
+}

unbenannt.kicad_pro

@@ -0,0 +1,420 @@
+{
+  "board": {
+    "design_settings": {
+      "defaults": {
+        "board_outline_line_width": 0.09999999999999999,
+        "copper_line_width": 0.19999999999999998,
+        "copper_text_italic": false,
+        "copper_text_size_h": 1.5,
+        "copper_text_size_v": 1.5,
+        "copper_text_thickness": 0.3,
+        "copper_text_upright": false,
+        "courtyard_line_width": 0.049999999999999996,
+        "dimension_precision": 4,
+        "dimension_units": 3,
+        "dimensions": {
+          "arrow_length": 1270000,
+          "extension_offset": 500000,
+          "keep_text_aligned": true,
+          "suppress_zeroes": false,
+          "text_position": 0,
+          "units_format": 1
+        },
+        "fab_line_width": 0.09999999999999999,
+        "fab_text_italic": false,
+        "fab_text_size_h": 1.0,
+        "fab_text_size_v": 1.0,
+        "fab_text_thickness": 0.15,
+        "fab_text_upright": false,
+        "other_line_width": 0.15,
+        "other_text_italic": false,
+        "other_text_size_h": 1.0,
+        "other_text_size_v": 1.0,
+        "other_text_thickness": 0.15,
+        "other_text_upright": false,
+        "pads": {
+          "drill": 0.0,
+          "height": 0.95,
+          "width": 0.8
+        },
+        "silk_line_width": 0.15,
+        "silk_text_italic": false,
+        "silk_text_size_h": 1.0,
+        "silk_text_size_v": 1.0,
+        "silk_text_thickness": 0.15,
+        "silk_text_upright": false,
+        "zones": {
+          "45_degree_only": false,
+          "min_clearance": 0.508
+        }
+      },
+      "diff_pair_dimensions": [],
+      "drc_exclusions": [],
+      "meta": {
+        "version": 2
+      },
+      "rule_severities": {
+        "annular_width": "error",
+        "clearance": "error",
+        "copper_edge_clearance": "error",
+        "courtyards_overlap": "error",
+        "diff_pair_gap_out_of_range": "error",
+        "diff_pair_uncoupled_length_too_long": "error",
+        "drill_out_of_range": "error",
+        "duplicate_footprints": "warning",
+        "extra_footprint": "warning",
+        "footprint_type_mismatch": "error",
+        "hole_clearance": "error",
+        "hole_near_hole": "error",
+        "invalid_outline": "error",
+        "item_on_disabled_layer": "error",
+        "items_not_allowed": "error",
+        "length_out_of_range": "error",
+        "malformed_courtyard": "error",
+        "microvia_drill_out_of_range": "error",
+        "missing_courtyard": "ignore",
+        "missing_footprint": "warning",
+        "net_conflict": "warning",
+        "npth_inside_courtyard": "ignore",
+        "padstack": "error",
+        "pth_inside_courtyard": "ignore",
+        "shorting_items": "error",
+        "silk_over_copper": "warning",
+        "silk_overlap": "warning",
+        "skew_out_of_range": "error",
+        "through_hole_pad_without_hole": "error",
+        "too_many_vias": "error",
+        "track_dangling": "warning",
+        "track_width": "error",
+        "tracks_crossing": "error",
+        "unconnected_items": "error",
+        "unresolved_variable": "error",
+        "via_dangling": "warning",
+        "zone_has_empty_net": "error",
+        "zones_intersect": "error"
+      },
+      "rules": {
+        "allow_blind_buried_vias": false,
+        "allow_microvias": false,
+        "max_error": 0.005,
+        "min_clearance": 0.0,
+        "min_copper_edge_clearance": 0.0,
+        "min_hole_clearance": 0.25,
+        "min_hole_to_hole": 0.25,
+        "min_microvia_diameter": 0.19999999999999998,
+        "min_microvia_drill": 0.09999999999999999,
+        "min_silk_clearance": 0.0,
+        "min_through_hole_diameter": 0.3,
+        "min_track_width": 0.19999999999999998,
+        "min_via_annular_width": 0.049999999999999996,
+        "min_via_diameter": 0.39999999999999997,
+        "solder_mask_clearance": 0.0,
+        "solder_mask_min_width": 0.0,
+        "use_height_for_length_calcs": true
+      },
+      "track_widths": [],
+      "via_dimensions": [],
+      "zones_allow_external_fillets": false,
+      "zones_use_no_outline": true
+    },
+    "layer_presets": []
+  },
+  "boards": [],
+  "cvpcb": {
+    "equivalence_files": []
+  },
+  "erc": {
+    "erc_exclusions": [],
+    "meta": {
+      "version": 0
+    },
+    "pin_map": [
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0,
+        1,
+        2
+      ],
+      [
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        1,
+        1,
+        2,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        1,
+        1,
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        2,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2
+      ]
+    ],
+    "rule_severities": {
+      "bus_definition_conflict": "error",
+      "bus_entry_needed": "error",
+      "bus_label_syntax": "error",
+      "bus_to_bus_conflict": "error",
+      "bus_to_net_conflict": "error",
+      "different_unit_footprint": "error",
+      "different_unit_net": "error",
+      "duplicate_reference": "error",
+      "duplicate_sheet_names": "error",
+      "extra_units": "error",
+      "global_label_dangling": "warning",
+      "hier_label_mismatch": "error",
+      "label_dangling": "error",
+      "lib_symbol_issues": "warning",
+      "multiple_net_names": "warning",
+      "net_not_bus_member": "warning",
+      "no_connect_connected": "warning",
+      "no_connect_dangling": "warning",
+      "pin_not_connected": "error",
+      "pin_not_driven": "error",
+      "pin_to_pin": "warning",
+      "power_pin_not_driven": "error",
+      "similar_labels": "warning",
+      "unannotated": "error",
+      "unit_value_mismatch": "error",
+      "unresolved_variable": "error",
+      "wire_dangling": "error"
+    }
+  },
+  "libraries": {
+    "pinned_footprint_libs": [],
+    "pinned_symbol_libs": []
+  },
+  "meta": {
+    "filename": "unbenannt.kicad_pro",
+    "version": 1
+  },
+  "net_settings": {
+    "classes": [
+      {
+        "bus_width": 12.0,
+        "clearance": 0.2,
+        "diff_pair_gap": 0.25,
+        "diff_pair_via_gap": 0.25,
+        "diff_pair_width": 0.2,
+        "line_style": 0,
+        "microvia_diameter": 0.3,
+        "microvia_drill": 0.1,
+        "name": "Default",
+        "pcb_color": "rgba(0, 0, 0, 0.000)",
+        "schematic_color": "rgba(0, 0, 0, 0.000)",
+        "track_width": 0.25,
+        "via_diameter": 0.8,
+        "via_drill": 0.4,
+        "wire_width": 6.0
+      }
+    ],
+    "meta": {
+      "version": 2
+    },
+    "net_colors": null
+  },
+  "pcbnew": {
+    "last_paths": {
+      "gencad": "",
+      "idf": "",
+      "netlist": "",
+      "specctra_dsn": "",
+      "step": "",
+      "vrml": ""
+    },
+    "page_layout_descr_file": ""
+  },
+  "schematic": {
+    "annotate_start_num": 0,
+    "drawing": {
+      "default_line_thickness": 6.0,
+      "default_text_size": 50.0,
+      "field_names": [],
+      "intersheets_ref_own_page": false,
+      "intersheets_ref_prefix": "",
+      "intersheets_ref_short": false,
+      "intersheets_ref_show": false,
+      "intersheets_ref_suffix": "",
+      "junction_size_choice": 3,
+      "label_size_ratio": 0.375,
+      "pin_symbol_size": 25.0,
+      "text_offset_ratio": 0.15
+    },
+    "legacy_lib_dir": "",
+    "legacy_lib_list": [],
+    "meta": {
+      "version": 1
+    },
+    "net_format_name": "",
+    "ngspice": {
+      "fix_include_paths": true,
+      "fix_passive_vals": false,
+      "meta": {
+        "version": 0
+      },
+      "model_mode": 0,
+      "workbook_filename": ""
+    },
+    "page_layout_descr_file": "",
+    "plot_directory": "",
+    "spice_adjust_passive_values": false,
+    "spice_external_command": "spice \"%I\"",
+    "subpart_first_id": 65,
+    "subpart_id_separator": 0
+  },
+  "sheets": [
+    [
+      "9538e4ed-27e6-4c37-b989-9859dc0d49e8",
+      ""
+    ]
+  ],
+  "text_variables": {}
+}